|
|
|
|
|
KX III network speed setting |
|||||||
|---|---|---|---|---|---|---|---|
Network switch port setting |
|
Auto |
1000/Full |
100/Full |
100/Half |
10/Full |
10/Half |
Auto |
Highest Available Speed |
1000/Full |
KX III: 100/Full Switch: 100/Half |
100/Half |
KX III: 10/Full Switch: 10/Half |
10/Half |
|
1000/Full |
1000/Full |
1000/Full |
No Communication |
No Communication |
No Communication |
No Communication |
|
100/Full |
KX III: 100/Half Switch: 100/Full |
KX III: 100/Half Switch: 100/Full |
100/Full |
KX III: 100/Half Switch: 100/Full |
No Communication |
No Communication |
|
100/Half |
100/Half |
100/Half |
KX III: 100/Full Switch: 100/Half |
100/Half |
No Communication |
No Communication |
|
10/Full |
KX III: 10/Half Switch: 10/Full |
No Communication |
No Communication |
No Communication |
10/Full |
KX III: 10/Half Switch: 10/Full |
|
10/Half |
10/Half |
No Communication |
No Communication |
No Communication |
KX III: 10/Full Switch: 10/Half |
10/Half |
|
Legend:
|
Does not function as expected |
|
|
|
Supported |
|
|
|
Functions; not recommended |
|
|
|
NOT supported by Ethernet specification; product will communicate, but collisions will occur |
|
|
|
Per Ethernet specification, these should be “no communication,” however, note that the KX III behavior deviates from expected behavior |
Note: For reliable network communication, configure the KX III and the LAN switch to the same LAN Interface Speed and Duplex. For example, configure the KX III and LAN Switch to Autodetect (recommended), or set both to a fixed speed/duplex such as 100MB/s/Full.