|
|
|
|
|
Two modes of operation are provided for blade chassis: manual configuration and auto-discovery, depending on the blade chassis capabilities.
Configure the mode by selecting Device Services > Port Configuration to open the Port page. Options are available in the "Blade Server Chassis Port Configuration" section of the page.
If a blade chassis is configured for auto-discovery, the Dominion device tracks and updates the following:
Note: In the case of IBM Blade Center Models E and H, the KX III only supports auto-discovery for AMM[1] as the acting primary management module.
Select the "Blade Auto-Discovery" checkbox to enable auto-discovery. To locate a blade at this time, click the "Discover Blades in Chassis Now" button.