Netzwerk-Geschwindigkeitseinstellung von LX |
|||||||
---|---|---|---|---|---|---|---|
Porteinstellung Netzwerkswitch |
|
Automatisch |
1000/Voll |
100/Voll |
100/Halb |
10/Voll |
10/Halb |
Automatisch |
Höchste verfügbare Geschwindigkeit |
1000/Voll |
LX: 100/Voll Switch: 100/Halb |
100/Halb |
LX: 10/Voll Switch: 10/Halb |
10/Halb |
|
1000/Voll |
1000/Voll |
1000/Voll |
Keine Kommunikation |
Keine Kommunikation |
Keine Kommunikation |
Keine Kommunikation |
|
100/Voll |
LX: 100/Halb Switch: 100/Voll |
LX: 100/Halb Switch: 100/Voll |
100/Voll |
LX: 100/Halb Switch: 100/Voll |
Keine Kommunikation |
Keine Kommunikation |
|
100/Halb |
100/Halb |
100/Halb |
LX: 100/Voll Switch: 100/Halb |
100/Halb |
Keine Kommunikation |
Keine Kommunikation |
|
10/Voll |
LX: 10/Halb Switch: 10/Voll |
Keine Kommunikation |
Keine Kommunikation |
Keine Kommunikation |
10/Voll |
LX: 10/Halb Switch: 10/Voll |
|
10/Halb |
10/Halb |
Keine Kommunikation |
Keine Kommunikation |
Keine Kommunikation |
LX: 10/Voll Switch: 10/Halb |
10/Halb |
Legende:
|
Funktioniert nicht wie erwartet |
|
|
|
Unterstützt |
|
|
|
Funktionen; nicht empfohlen |
|
|
|
NICHT von Ethernet-Spezifikationen unterstützt; Produkt kommuniziert, es treten allerdings Kollisionen auf. |
|
|
|
Laut Ethernet-Spezifikation sollte hier "Keine Kommunikation" gelten, beachten Sie jedoch, dass das Verhalten des LX vom erwarteten Verhalten abweicht. |
Hinweis: Um eine zuverlässige Netzwerkkommunikation zu erhalten, konfigurieren Sie LAN-Schnittstellengeschwindigkeit und Duplex für LX und den LAN-Switch auf den gleichen Wert. Konfigurieren Sie beispielsweise LX und den LAN-Switch auf "Autodetect" (Automatische Erkennung, empfohlen) oder stellen Sie sie auf ein(e) feste(s) Geschwindigkeit/Duplex wie 100MB/s/Voll.