Restore Blade Servers Ports to Normal KX2/KX3 Ports

This section applies only to the blade chassis without an integrated KVM switch, such as HP BladeSystem series.

You may re-configure blade servers beneath the virtual blade chassis as normal KX2/KX3 ports in the Devices tab.

• To restore blade servers to normal KX2/KX3 ports:

1. In the Devices tab, select the KX2/KX3 device whose blade servers you want to re-configure as normal KVM ports.
2. Change the blade port group for these blade servers to a non-blade port group.
   1. In CC-SG, choose Devices > Device Manager > Launch Admin. The KX2 or KX3 Admin Client opens.
   2. Click Port Group Management.
   3. Click the blade port group whose group property you want to change.
   4. Deselect the Blade Server Group checkbox.
   5. Click OK and exit the client.
3. The virtual blade chassis disappears in the Devices tab. Now you can re-configure the blade server ports as normal KX2/KX3 ports in CC-SG. See Configure a KVM Port.