|
|
|
|
|
Once you have connected the target server to the KX II through the target server video ports, the KX II detects the connection and displays the ports on the Port Configuration page. See Configuring Standard Target Servers for instructions.
After the ports are configured, they can be grouped in a dual video port group.
Note: Existing ports do not have to be configured if you have already done so. See Creating a Dual Video Port Group for information on creating dual video port groups.
Configure the target server mouse mode after you connect to the target. For example, set the target server to use Intelligent mouse mode if you are using Intelligent mouse mode on your remote client. See Mouse Settings for the mouse mode settings that should be applied based on the operating system you are using.