Add New Macro

• To add a new macro:

1. Choose Inputs > Macro Editor.
2. Click Add New Macro.

   

3. Enter a Name for the new macro. The name will appear in the Send Macro menu once the macro is saved.
4. Click Add Key, then press the key you want to add to the macro. The key press and key release appear in the Keys list.
   • To add more keys, click Add Key again, and press another key.
   • To remove a key, select it in the Keys list and click Delete Key
5. To put the keys in the correct sequence, click to select a key in the Keys list, then click the up and down arrows.
6. To add a 500 ms delay to a key sequence, click Add Delay. A delay in the middle of a press-and-release key sequence indicates holding down a key. Add multiple delays to indicate a longer press-and-hold of a key. Click the up and down arrows to move the delays into the correct sequence.
7. Click OK to save. To use this macro from your toolbar, click Use in Toolbar. See Add a Macro to the Toolbar for more details.

   

   This example shows a macro for a Mac bootup sequence that requires a 2-second delay.