Do one of the following to configure DNS.
Step |
|
---|---|
Select "Obtain DNS Server Address Automatically" if DHCP is selected. The DNS information is then provided by the DHCP server that is used. When finished, click OK. Your KX III device is now network accessible. |
Step |
|
---|---|
Enter the following information if the "Use the Following DNS Server Addresses" is selected -
These addresses are the primary and secondary DNS addresses used if the primary DNS server connection is lost due to an outage. Even if DHCP is selected in the IPv4 section, enter the primary and secondary addresses since these addresses are used to connect to the DNS server. When finished, click OK. Your KX III device is now network accessible. Configure LAN interface settings as needed. See LAN Interface Settings |