|
|
|
|
|
A blade chassis without an integrated KVM switch, such as HP BladeSystem series, allows each blade server to connect to KX2 respectively via a CIM. As each blade server in that chassis has a CIM for access, when a user accesses one blade server, others still can access the other blade servers.
When configuring all KX2 ports in CC-SG, the blade servers connected to the KX2 device are configured. If you have properly configured a blade port group for these blade servers on the KX2 device, CC-SG then creates a virtual blade chassis at the KX2 port level as the container for these blade servers. See Add a Blade Chassis Device. Otherwise, these blade servers appear as normal KX2 ports in the Devices tab of CC-SG.