This section applies to outlet-switching capable models only.
You can operate the front panel LED display to turn on or off an outlet. To do this, you must first enable the front panel outlet control function. See Enabling Front Panel Outlet Switching.
To turn on an outlet:
Press the Up or Down button until the desired outlet's number is shown in the two‑digit row.
Press and hold the Up button until the confirmation message "on?" is shown in the three-digit row.
Press and hold the Up button until the above confirmation message disappears, indicating that the outlet has been turned on.
Verify that the desired outlet's LED has turned red.
To turn off an outlet:
Press the Up or Down button until the desired outlet's number is shown in the two‑digit row.
Press and hold the Down button until the confirmation message "oF?" is shown in the three-digit row.
Press and hold the Down button until the above confirmation message disappears, indicating that the outlet has been turned off.
Verify that the desired outlet's LED has turned green.
Tip: If you want to abort the outlet switching operation after the confirmation message appears, press either button (without holding it) and the confirmation message will disappear.
