USB Connection Settings are disabled when the port is connected. All users must be disconnected from the KVM target to change the USB port settings.
To define USB connections for the target server:
Click Port Configuration, then scroll down to USB Connection Settings.
Select the USB connection settings you will be using:
Enable Absolute Mouse - Disable if the target does not support absolute mouse mode
Use Full Speed - Useful for BIOS that cannot accommodate High Speed USB devices. Clear the checkbox to allow negotiation to the target's highest USB speed capability.
Enumerate virtual media first before keyboard and mouse: Useful to resolve issues when a target cannot detect USB mass storage at the BIOS.
Click Save.
Set Advanced Options as needed:
Virtual Media Interface Types: Both interfaces cannot be set to CDROM or Removable Disk.
Disabled
CDROM
Removable Disk
Auto - can function as either CDROM or Removable Drive but not both at the same time
Remove Unused VM Interface From Device Configuration: Select this option to remove the drive when VM is disconnected. Clear this option to allow empty drives.