SNMP Settings

You can enable or disable SNMP communication between an SNMP manager and the Dominion KX IV–101.

• To configure SNMP communication:

1. Click Device Settings > Network Services > SNMP.
2. Enable or disable SNMP v1 / v2c and/or SNMP v3 by clicking the corresponding checkbox.
   1. The SNMP v1/v2c read-only access is enabled by default. The default 'Read community string' is "public".
   2. To enable read-write access, type the 'Write community string.' Usually the string is "private".
3. Enter the MIB-II system group information, if applicable.
   1. sysContact - the contact person in charge of the system
   2. sysName - the name assigned to the system
   3. sysLocation - the location of the system
4. Click the download link to get the SNMP MIB to use with your SNMP manager.
5. Click Save.