HTTP/HTTPS Ports

Dominion KX IV–101 uses the default HTTP/HTTPS ports 80/443. You can change the default if needed.

HTTP access will be redirected to HTTPS.

• To change the default HTTP/HTTPS ports:

1. Click Device Settings > Network Settings > HTTP/HTTPS Ports.
2. Select the HTTP Access checkbox if you need HTTP enabled.

   Note: When HTTP is disabled, AKC is downloaded via HTTPS. Microsoft .NET will check if the device TLS certificate is valid. Device certificate must be added into the "Trusted Root Certification Authorities" zone, and the common name of the certificate should match the device IP address or hostname.

3. Enter the port numbers then click Save.

   

4. The connection to the device will refresh with new HTTP/HTTPS port numbers. You must login again.