Update Firmware Using SCP

While updating firmware using SCP, all user management operations are suspended and all login attempts fail.

Warning: Do NOT perform the firmware upgrade over a wireless network connection.

• To update the firmware via SCP:

1. Type the following SCP command and press Enter.

   scp <firmware file> <user name>@<device ip>:/fwupdate

   • <firmware file> is the Dominion KX IV–101 firmware's filename. If the firmware file is not in the current directory, you must include the path in the filename.
   • <user name> is the "admin" or any user profile with the Firmware Update permission.
   • <device ip> is the IP address or hostname of the Dominion KX IV–101 where you want to upload the specified file.
2. Type the password when prompted, and press Enter.

   The system transmits the specified firmware file to the Dominion KX IV–101, and shows the transmission speed and percentage.

   When the transmission is complete, it exits without a message. Dominion KX IV–101 will start to update its firmware after transmission is done successfully.

3. Check the Dominion KX IV–101 web interface for update progress and success message when update is complete.

• SCP example

  scp kx-kx4-040100-47253.rfp admin@192.168.87.50:/fwupdate

• Windows PSCP command:

PSCP in Windows works in a similar way to the SCP.

• pscp <firmware file> <user name>@<device ip>:/fwupdate