Execute Auto Configurations with a USB Stick

Following are steps to configure SX IIs using an auto configuration from a USB stick.

Prepare the USB stick and put the auto configuration file on it. See and , if you have not already done so.

1. Make sure device is in working condition.
2. Plug the prepared USB stick in to a USB drive on either the front or back of the SX II you are configuring.
3. The script executes automatically after validating the username and password credentials.
4. Once the script finishes, SX II beeps twice and the <Device_Type>_<Serial_Number_Of_Device>_result.txt file is generated and saved at the top directory of the USB stick.
5. You can then unplug the USB stick.

Important - the script will stop executing if you unplug the USB stick prior to its completion.