Connect a Laptop to SX II Using a Cross-Over Cable (Optional)

The first time you configure SX II, if you are connecting from the LAN port on laptop to the LAN1 port on SX II using a crossover cable, do the following -

  1. Use cross-over cable to connect between SX II LAN1 and the laptop LAN port.
  2. Set the Static IP of the LAN port that is connected to SX II to 192.168.0.191 and Network Mask to 255.255.255.0.
  3. Launch your browser and access SX II via 192.168.0.192.

See Also

Initial SX II Configuration from the Remote Console