When disconnecting target servers and/or rack PDUs from the device, all power associations should first be deleted. When a target has been associated with a rack PDU and the target is removed from the device, the power association remains. When this occurs, you are not able to access the Port Configuration for that disconnected target server in Device Settings so that the power association can be properly remove.
To remove a rack PDU association:
Select the appropriate rack PDU from the Power Strip Name drop-down list.
For that rack PDU, select the appropriate outlet from the Outlet Name drop-down list.
From the Outlet Name drop-down list, select None.
Click OK. That rack PDU/outlet association is removed and a confirmation message is displayed.
To remove a rack PDU association if the rack PDU has been removed from the target:
Click Device Settings > Port Configuration and then click on the active target.
Associate the active target to the disconnected power port. This will break the disconnected target's power association.
Finally, associate the active target to the correct power port.
