Connecting the Equipment

• Connect the Dominion KX IV–101 to the network:
  • Connect the Dominion KX IV–101 to the network using the LAN port.
• Connect your target server:
  • Connect the target server with an HDMI cable to the Dominion KX IV–101 HDMI IN port. If the target server video is not HDMI, purchase a Raritan cable- or video-adapter.
  • Connect the target server to the Dominion KX IV–101 USB IN port using the included USB cable.
• Connect the power adapter:
  • Newer models include a power adapter with a 4-pin connector. Push the adapter in to lock.

    

  • Some of the original models include twist-to-lock adapters, as shown in the image below. These are marked with an arrow. Connect with the arrow facing up. Push in firmly and twist clockwise to lock. Check to ensure it is locked.

    

Power on all devices.