SNMP provides the ability to send traps, or notifications, to advise an administrator when one or more conditions have been met.
The following table lists the KX III SNMP traps:
Trap Name |
Description |
---|---|
bladeChassisCommError |
A communications error with blade chassis device connected to this port was detected. |
cimConnected |
The CIM is connected. |
cimDisconnected |
The CIM is disconnected. |
cimUpdateStarted |
The CIM update start is underway. |
cimUpdateCompleted |
The CIM update is complete. |
configBackup |
The device configuration has been backed up. |
configRestore |
The device configuration has been restored. |
deviceUpdateFailed |
Device update has failed. |
deviceUpgradeCompleted |
The KX III has completed update via an RFP file. |
deviceUpgradeStarted |
The KX III has begun update via an RFP file. |
factoryReset |
The device has been reset to factory defaults. |
firmwareFileDiscarded |
Firmware file was discarded. |
firmwareUpdateFailed |
Firmware update failed. |
firmwareValidationFailed |
Firmware validation failed. |
groupAdded |
A group has been added to the KX III system. |
groupDeleted |
A group has been deleted from the system. |
groupModified |
A group has been modified. |
ipConflictDetected |
An IP Address conflict was detected. |
ipConflictResolved |
An IP Address conflict was resolved. |
networkFailure |
An Ethernet interface of the product can no longer communicate over the network. |
networkParameterChanged |
A change has been made to the network parameters. |
passwordSettingsChanged |
Strong password settings have changed. |
portConnect |
A previously authenticated user has begun a KVM session. |
portConnectionDenied |
A connection to the target port was denied. |
portDisconnect |
A user engaging in a KVM session closes the session properly. |
portStatusChange |
The port has become unavailable. |
powerNotification |
The power outlet status notification: 1=Active, 0=Inactive. |
powerOutletNotification |
Power strip device outlet status notification. |
rebootCompleted |
The KX III has completed its reboot. |
rebootStarted |
The KX III has begun to reboot, either through cycling power to the system or by a warm reboot from the OS. |
scanStarted |
A target server scan has started. |
scanStopped |
A target server scan has stopped. |
securityBannerAction |
Security banner was accepted or rejected. |
securityBannerChanged |
A change has been made to the security banner. |
securityViolation |
Security violation. |
setDateTime |
The date and time for the device has been set. |
setFIPSMode |
FIPS mode has been enabled. |
startCCManagement |
The device has been put under CommandCenter Management. |
stopCCManagement |
The device has been removed from CommandCenter Management. |
userAdded |
A user has been added to the system. |
userAuthenticationFailure |
A user attempted to log in without a correct username and/or password. |
userConnectionLost |
A user with an active session has experienced an abnormal session termination. |
userDeleted |
A user account has been deleted. |
userForcedLogout |
A user was forcibly logged out by Admin |
userLogin |
A user has successfully logged into the KX III and has been authenticated. |
userLogout |
A user has successfully logged out of the KX III properly. |
userModified |
A user account has been modified. |
userPasswordChanged |
This event is triggered if the password of any user of the device is modified. |
userSessionTimeout |
A user with an active session has experienced a session termination due to timeout. |
userUploadedCertificate |
A user uploaded a SSL certificate. |
vmImageConnected |
User attempted to mount either a device or image on the target using Virtual Media. For every attempt on device/image mapping (mounting) this event is generated. |
vmImageDisconnected |
User attempted to unmount a device or image on the target using Virtual Media. |