System events, if enabled, can generate SNMP notification events (traps), or can be logged to syslog or audit log. Use the Event Management - Destinations page to select which system events to track and where to send this information.
Note: SNMP traps will only be generated if the SNMP Logging Enabled option is checked; Syslog events will only be generated if the Enable Syslog Forwarding option is checked. Both of these options are in the Event Management - Settings page. See Event Management - Settings.
To select events and their destinations:
System events are categorized by Device Operation, Device Management, Security, User Activity, and User Group Administration.
Tip: Enable or disable entire categories by checking or clearing the category line checkboxes, respectively.
To reset to factory defaults:
SNMP provides the ability to send traps, or notifications, to advise an administrator when one or more conditions have been met. The following table lists the Dominion KSX SNMP traps:
Trap name |
Description |
---|---|
cimConnected |
A CIM is plugged into to the Dominion KSX port. |
cimDisconnected |
A CIM is either unplugged from the Dominion KSX port or powered-off. |
cimUpdateCompleted |
CIM firmware update process completed. |
cimUpdateStarted |
CIM firmware update process started. |
configBackup |
The device configuration has been backed up. |
configRestore |
The device configuration has been restored. |
deviceUpdateFailed |
Device update has failed. |
deviceUpgradeCompleted |
The Dominion KSX has completed update via an RFP file. |
deviceUpgradeStarted |
The Dominion KSX has begun update via an RFP file. |
ethernetFailover |
An Ethernet failover was detected and restored on a new Ethernet interface. |
factoryReset |
The device has been reset to factory defaults. |
firmwareFileDiscarded |
Firmware file was discarded. |
firmwareUpdateFailed |
Firmware update failed. |
firmwareValidationFailed |
Firmware validation failed. |
groupAdded |
A group has been added to the Dominion KSX system. |
groupDeleted |
A group has been deleted from the system. |
groupModified |
A group has been modified. |
ipConflictDetected |
An IP Address conflict was detected. |
ipConflictResolved |
An IP Address conflict was resolved. |
networkFailure |
An Ethernet interface of the product can no longer communicate over the network. |
networkParameterChanged |
A change has been made to the network parameters. |
passwordSettingsChanged |
Strong password settings have changed. |
portConnect |
A previously authenticated user has begun a KVM session. |
portConnectionDenied |
A connection to the target port was denied. |
portDisconnect |
A user engaging in a KVM session closes the session properly. |
portStatusChange |
The port has become unavailable. |
powerNotification |
The power outlet status notification: 1=Active, 0=Inactive. |
powerOutletNotification |
Power strip device outlet status notification. |
rebootCompleted |
The Dominion KSX has completed its reboot. |
rebootStarted |
The Dominion KSX has begun to reboot, either through cycling power to the system or by a warm reboot from the OS. |
securityViolation |
Security violation. |
startCCManagement |
The device has been put under CommandCenter Management. |
stopCCManagement |
The device has been removed from CommandCenter Management. |
sxPortAlert |
Logs keywords and sends out an event. |
userAdded |
A user has been added to the system. |
userAuthenticationFailure |
A user attempted to log in without a correct username and/or password. |
userConnectionLost |
A user with an active session has experienced an abnormal session termination. |
userDeleted |
A user account has been deleted. |
userLogin |
A user has successfully logged into the Dominion KSX and has been authenticated. |
userLogout |
A user has successfully logged out of the Dominion KSX properly. |
userModified |
A user account has been modified. |
userPasswordChanged |
This event is triggered if the password of any user of the device is modified. |
userSessionTimeout |
A user with an active session has experienced a session termination due to timeout. |
vmImageConnected |
User attempted to mount either a device or image on the target using Virtual Media. For every attempt on device/image mapping (mounting) this event is generated. |
vmImageDisconnected |
User attempted to unmount a device or image on the target using Virtual Media. |