Setting Emulation on a Target

To set emulation on the target:

• Ensure that the encoding in use on the host matches the encoding configured for the target device, that is, if the character-set setting on a Sun Solaris server is set to ISO8859-1, the target device should also be set to ISO8859-1.

  Note: ISO9660 format is the standard supported by Raritan. However, other CD-ROM extensions may also work.

• Ensure that the terminal emulation on the target host connected to the Dominion KSX serial port is set to VT100, VT220, VT320 or ANSI.

On most UNIX systems, export TERM=vt100 (or vt220|vt320|ansi)" sets the preferred terminal emulation type on the UNIX target device, that is, if the terminal type setting on a HP-UX server is set to VT100, the Access Client should also be set to VT100.

The setting for terminal emulation on the Dominion KSX is a property associated with the port settings for a particular target device. Ensure that the settings for terminal emulation in the client software such as Telnet or SSH client are capable of supporting the target device.