Configuring Powerstrips that are Managed by Another Device in CC-SG

In CC-SG, managed powerstrips can be connected to one of the following devices:

• Dominion KX3
• Dominion KX2
• Dominion KX2-101
• Dominion SX 3.0
• Dominion SX 3.1
• Dominion KSX2
• Power IQ - See Power Control of Power IQ IT Devices

You must know which Raritan device the managed powerstrip is connected to physically.

Note: You can also have a PX powerstrip that is connected to your IP network, but not connected to any other Raritan device. See Managed PowerStrips for details on configuring power control for these powerstrips.

• To configure managed powerstrips in CC-SG:

1. Complete all physical connections between the device, the powerstrip, and the nodes that are powered by the powerstrip.
2. Add the managing device to CC-SG. The procedure varies for different Raritan devices. See the section that corresponds to the device the powerstrip is connected to:
   • Configuring PowerStrips Connected to KX3, KX2, KX2-101, and KSX2
   • Configuring PowerStrips Connected to SX 3.0
   • Configuring PowerStrips Connected to SX 3.1.
3. Configure outlets. See Configuring Outlets on a PowerStrip.
4. Associate each outlet with the node that it powers. See Interfaces for Managed Powerstrip Connections.